Why is My Amana Dryer Not Heating Up

Why is My Amana Dryer Not Heating Up?

Amana dryers are renowned for their durability and efficiency, but they can sometimes face issues like any appliance. One of the most frequent problems is the dryer not heating up, leaving you with damp clothes and frustration. In this in-depth guide, we will explore why your Amana dryer might need to be fixed and offer practical solutions to help you resolve the problem.

Circuit Breaker Issues with the Heating Element

A tripped circuit breaker could be responsible for your Amana dryer not heating up. The circuit breaker protects your home’s electrical system from damage caused by excessive current. When a circuit breaker trips, it can disrupt the power supply to your dryer, preventing it from heating up. Identifying and resolving any circuit breaker issues is essential to ensure your dryer functions correctly.


  • Inspect the circuit breaker panel to see if any breakers have been tripped.
  • Reset the breaker by switching it to the “Off” position and then back to “On.”
  • Contact a professional electrician to diagnose the issue if the breaker trips again.

Insufficient Power Supply for Electric Dryers

An electric Amana dryer requires 220V to 240V of power to operate efficiently. If your dryer isn’t receiving the required voltage, it won’t heat up, leaving your clothes damp and cold. Ensuring that your dryer has access to the necessary power is crucial for proper functioning.


  • Ensure the power cord and outlet are functioning correctly.
  • Measure the voltage at the outlet using a multimeter.
  • Consult a professional electrician if the voltage is too low.
  • If the voltage is insufficient, seek the assistance of a qualified electrician to diagnose and resolve the problem.

Gas Supply Issues for Gas Dryers:

A closed gas supply or shut-off valve can prevent a gas dryer from heating up. It is essential to verify that the gas supply is open and functioning properly for your gas dryer to operate correctly.


  • Ensure the gas supply valve is open.
  • Inspect the gas line to identify any potential damage or blockages.
  • Contact a professional technician for gas supply issues.
  • If you suspect a gas leak or any other gas supply problems, contact a professional technician.

Airflow Complications Due to Lint and Vent Obstructions:

A blocked dryer vent, lint trap, screen, or exhaust can cause your Amana dryer not to heat up. These obstructions can restrict airflow, causing hot air to be trapped in the dryer drum, which may lead to overheating and the dryer not heating up.


  • Frequently clean the lint screen to ensure the lint filter has adequate airflow.
  • Inspect the dryer vent and exhaust for blockages or damage.
  • Examine the dryer vent and exhaust to identify any obstructions or damage.
  • Use a vacuum cleaner to remove lint or debris if necessary.
  • If needed, utilize a vacuum cleaner to eliminate lint or debris from the exhaust vent and exhaust system.

Blown Electric or Gas Dryer Thermal Fuse:

A blown thermal fuse is another potential cause of your Amana dryer not heating up. The thermal fuse is a safety mechanism that prevents the dryer from overheating by disconnecting the power to the heating element. If the thermal fuse has blown, your dryer will not heat up.


  • Access the dryer’s rear panel and locate the thermal fuse.
  • Inspect the thermal fuse for any visible damage.
  • If the fuse appears damaged, replace it with a new one.

Limit Switch Hindering Dryer Heating

The limit switch is a critical component that prevents the dryer from overheating by regulating its temperature. If the limit switch malfunctions, your Amana dryer may not heat up correctly.


  • Remove the back panel of the dryer to access the limit switch.
  • Test the switch using a multimeter.

Defective or Broken Dryer Control Timer

A malfunctioning control timer can also be responsible for your Amana dryer not heating up. The control timer regulates the different drying cycles, including the heating process. If the timer is defective or broken, your dryer may not generate heat as it should.


  • Locate the control timer, typically found behind the control panel.
  • Inspect the timer for any visible damage or loose connections.
  • Replace the control timer if it appears to be malfunctioning or damaged.

Malfunctioning Thermostat

A defective dryer cycling thermostat can cause your Amana dryer not to heat up properly. The thermostat monitors air temperature and maintains the dryer’s temperature. If it is not functioning correctly, the dryer may not heat up or maintain the desired temperature.


  • Access the thermostat by removing the back panel of the dryer.
  • Test the high-limit thermostat using a multimeter to determine if it’s faulty.
  • Replace the thermostat with a new one if it appears to be defective.

Non-Functional Electric Heating Element

If your electric Amana dryer isn’t heating up, the heating element might be to blame. The heating element generates the heat required to dry your clothes. Your electric dryer will not produce heat if it’s not working correctly.


  • Remove the dryer’s back panel to access the heating element.
  • Visually inspect the element for any damage or burn marks.
  • If the gas valve ports the heating element is damaged, replace it with a new one.

Failing Gas Valve Ignition Solenoids

In gas dryers, failing gas valve ignition solenoids can cause the dryer not to heat properly. These solenoids control the gas flow to the burner assembly, and the dryer won’t heat up if they’re not functioning correctly.


  • Locate the gas valve solenoid coils, typically found near the burner assembly.
  • Test the solenoids using a multimeter to check for any malfunction.
  • Replace the solenoids if they’re not functioning correctly.

Broken Gas Dryer Igniter or Flame Sensor

A damaged igniter or flame sensor can also cause your gas Amana dryer not to heat up. The igniter ignites the gas, while the flame sensor detects the presence of a flame. The dryer won’t heat up if either component is broken or malfunctioning.


  • Access the igniter and flame sensor by removing the front or bottom panel of the dryer.
  • Inspect both components for any visible damage.
  • Replace the igniter or flame sensor if they appear damaged or malfunctioning.

Failing or Bad Control Board

A faulty control board can be another reason behind your Amana dryer not heating up. The control board manages the dryer’s various functions, including heating. If the control board is failing or damaged, your dryer may not heat up.


  • Locate the control board, usually found behind the control panel.
  • Inspect the control board for any visible damage or burnt components.
  • If the control board appears damaged or malfunctioning, replace it with a new one.


Dealing with an Amana dryer not heating up can be frustrating. Still, following the troubleshooting steps and solutions in this guide, you can identify the cause and fix the issue. Regular maintenance and cleaning can also prevent many of these problems from occurring in the first place, ensuring your dryer remains in optimal condition.


Why does my Amana clothes dryer not heat?

There are several reasons why your Amana clothes dryer might not be heating. It could be an issue with the thermal fuse, heating element, thermostat, timer motor, or power supply. Here is a more detailed explanation of these issues:

  • Thermal Fuse: This is a safety device designed to protect your dryer from overheating. It detects the temperature and if the dryer gets too hot, the fuse will blow to cut off the power to the heating element. If this fuse is blown, your dryer will not heat.
  • Heating Element: The heating element is responsible for generating heat in your dryer. If this component is burnt out or faulty, your dryer will not heat.
  • Thermostat: The dryer’s thermostat regulates the temperature within the drum. If it’s defective, it may not signal the heating element to heat up.
  • Timer Motor: This component controls the duration of the drying cycle. If it’s faulty, it may not signal the heating element to heat up.
  • Power Supply: Dryers require a significant amount of electricity to operate, and sometimes problems can occur with the electrical supply. If there’s a blown circuit breaker or if the voltage is improper, the dryer may not heat.

How do I know if my thermal fuse is blown?

To determine if your clothes dryer’s thermal fuse is blown, you’ll need to use a multimeter. Here are the steps:

  • First, ensure the dryer is unplugged before beginning any checks to avoid electric shock.
  • Locate the thermal fuse in your dryer. In most Amana dryers, it’s found on the blower housing or near the heating element.
  • Remove the thermal fuse from the dryer to test it.
  • Set your multimeter to the R X 1 setting. Place each of the multimeter’s probes on the fuse terminals. If the multimeter reads zero, the thermal fuse is functioning. If it reads anything else, the fuse is blown and needs to be replaced.

How do you fix a dryer that runs but doesn’t heat?

If your clothes dryer is running but not heating, you’ll first need to diagnose the issue, which could be due to a blown thermal fuse, a faulty heating element, a malfunctioning thermostat, or a problem with the timer motor or power supply. Once you’ve identified the problem, here’s how you can fix it:

  • Blown Thermal Fuse: Replace the thermal fuse. Remember to check what caused it to blow to avoid future issues. This could be due to a clogged vent.
  • Faulty Heating Element: Replace the heating element. This should be done by a professional unless you’re comfortable working with electrical appliances.
  • Malfunctioning Thermostat: Replace the thermostat. Like with the heating element, it’s best to have a professional do this unless you’re confident in your abilities.
  • Faulty Timer Motor: If the timer motor is not advancing or is stuck, it needs to be replaced.
  • Power Supply Issues: Check your circuit breaker and ensure the dryer is receiving the proper voltage. If there’s a problem, you might need an electrician to fix it.

Where is the thermal fuse located on my Amana dryer?

The thermal fuse in most Amana clothes dryers is typically located either on the blower housing or near the heating element. To access it, you’ll usually need to remove the back panel or the lower front panel of the dryer. Remember to unplug the dryer first before attempting to locate the thermal fuse to avoid electric shock. If you’re unsure of where the thermal fuse is or how to safely access it, it may be best to consult with a professional or refer to your specific model’s user manual.

Once you’ve located the thermal fuse, you can check it using a multimeter as outlined above. If the thermal fuse is blown, it’s important to replace it immediately to restore the function of your clothes dryer. Moreover, it’s crucial to understand that a blown thermal fuse is often indicative of other issues, such as a venting problem, that caused the dryer to overheat in the first place. Addressing these underlying issues will prevent the new thermal fuse from blowing as well.

When replacing the thermal fuse, ensure you have the correct replacement part that matches the specifications of your Amana clothes dryer model. Incorrect parts may not work or, worse, could potentially harm your dryer or pose a safety risk.

Remember, while many of these issues can be diagnosed and fixed with some basic tools and a bit of know-how, some problems may require professional repair. If you’re unsure, it’s always best to consult a professional to avoid damaging your appliance or risking your safety.

How can I maintain my Amana dryer to prevent heating issues?

Regularly clean the lint screen, vent, and exhaust system.

Check the dryer’s power supply and gas connection periodically.

Inspect the dryer’s components for damage or wear and replace them as necessary.

How often should I clean the lint screen on my Amana dryer?

It’s recommended to clean the lint screen after the dryer temperature every drying cycle. This prevents lint buildup and ensures proper airflow, contributing to efficient dryer operation.

Can I fix my Amana dryer not heating up by myself?

Depending on the issue, some repairs can be performed by a DIY enthusiast with essential tools and knowledge. However, for more complex issues or if you’re unsure about the repair, it’s best to consult a professional appliance repair service like Fox Appliance Repair Service to ensure a safe and effective repair.

How can Fox Appliance Repair Service help me with my Amana dryer not heating up?

Fox Appliance Repair Service has a team of skilled technicians who can quickly diagnose and repair a wide range of Amana dryer issues, including those related to defective heating elements. By choosing Fox Appliance Repair Service, you can be confident that your dryer will be fixed safely and efficiently, so you can return to enjoying warm, dry clothes in no time.

How can I extend the lifespan of my Amana dryer?

Regular maintenance and cleaning, as mentioned above, are crucial for extending the lifespan of your Amana dryer. Additionally, avoid overloading the dryer, as this can strain the motor and other components. By taking care of your appliance and addressing issues promptly with the help of professional services like Fox Appliance Repair Service, you can maximize the lifespan of your Amana dryer.

By following the troubleshooting steps and solutions in this guide, you can effectively address the problem. However, if you need clarification on any aspect of the repair process or professional assistance, please contact Fox Appliance Repair Service for reliable and efficient dryer repair services.


More Posts